Speak to our helpful staff today: 1800 154 153

Finishing

The final details for that Masterpiece

  • Argos MK3 Coater

    Spot coating provides printers with a real added-value service and differentiates them from their colleagues. The MK3 is ideal for small quantities (from 1 to thousands) flat Spot UV jobs in a digital or offset environment.



    Fast and versatile


    The speed of the systems varies from system to system and is depending on the print type and the number of Gloss layers used which result in a 3-D effect. Printing can be done on matt or glossy surfaces with or without aqueous coating, layered paper, plastic, PVC, polupropylene and other coated materials on a 100% flat paper path






    Features and benefits:

      • Selective coating
      • Vacuum feed system with double sheet detection
      • Spot coated sheets can be finished or handled immediately after printing.
      • 3D Effect
      • Up to 10 layers
      • No post lamination needed






  • Argos PureClean 5.0.2

    PureClean 5.0.2 Web-Sweep™ Systems neutralize and clean paper dust and paper chad from continuous forms. The Web-Sweep cleaning heads incorporate interior and exterior anti-static bars that facilitate the contaminants efficient removal during the cleaning process.

    Neutralizing the static bond of particulate on the web allows the nine opposing off-set agitator brushes to dislodge contaminants through "contact cleaning". The high velocity perpendicular air stream to the paper path blasts contaminants into the multi-stage high efficiency filters using “non-contact cleaning”.



    Static Electricity, gone!


    In addition to anti-static bars, the pickup heads are equipped with grounded brushes that minimize static electricity build-up on paper feeding into high speed printers.

    The anti-static brushes stretch across both sides of the paper, agitating paper dust, paper chad and other particulate that are then vacuumed away and collected by PureClean AirSystems™. Higher quality end product and data integrity are achieved while reducing downtime of high speed printers and inserters, as well as employee decreasing health problems and housekeeping costs.

    PureClean 5.0.2 Web-Sweep™ integration inside printers. When possible our systems can be integrated within printers to reduce length of printer lines in printing centers.






    Features and benefits:

      • Anti-static bars neutralize the web reducing static discharge issues and assist in the web cleaning process
      • Cleans paper promoting optimum print quality and throughput
      • Compact design
      • Compatible with all pre/post processing equipment
      • Reduces printer maintenance cost by minimizing wear & tear and damage to drums, print heads and hardware components
      • Eliminates abrasive paper dust






  • Argos Flat Coating Systems

    Argos Solution proposes 3 type of UV flat coating systems which can be used in handfed, automatic and inline mode to digital print systems. Having more than 100 year cumulated experiance in paper finishing solutions, our team has all knowledge in house to develop and build state of the art UV Coating systems:





    L380 V4

      • Maximum up to 35 meters /minute
      • Up to 5000 A3/hour
      • Maximum Paper Width 380mm
      • IR lamps if needed
      • Optional Feeder available
      • Feed substrate Up to 10 mm thickness
      • OEM branding possible
      • Ozone free lamps
      • Very small footprint of 1m³

    F400 V4

      • Maximum 60m/minute
      • Up to 9000 A3/hour
      • Maximum Paper width 400mm
      • Special inline bridge
      • Optional Feeder/stacker
      • Coating Pre heating
      • IR Lamps if needed

    F540 V4

      • Maximum 50m/minute
      • Up to 7500 A3/hour
      • Maximum paper width 540mm
      • Feeder / Stacker option
      • Inline connection to printers
      • Adjustable lamp power up to 160W/cm
      • Roller adjusyment by stepmotor adjustment






  • Newfoil 3530

    The latest machine from Newfoil is the 3530, designed to meet the demand for a wider web machine and be compatible with the increasingly popular digital printing systems. The new machine is capable of processing webs up to 350mm wide in large commercial sized rolls.



    Innovative and versatile


    A totally new machine, the 3530 features a host of innovative systems to make production more efficient and reduce operator input. The machine comprises of three sections, unwind, main machine and rewind. Each section has been optimised to give the best possible performance.

    Versatility remains a major feature of all Newfoil equipment and among the many options available are sheeting, rotary and back slitting, hologram registration systems, multi-lamination processes, variable data input and digital printing with laser and inkjet systems.


  • GM DC330 Dcoat

    As digital label printing becomes increasingly widespread, label printing houses are realising the need for all-in-one digital printing systems that provide fully finished, value-added label solutions. Grafisk Maskinfabrik answers this need with the DC330 a complete converting and finishing unit created especially for use with digital label printing presses.



    The DC330 Converter can be set up as an in-line extension to a digital label printing system allowing the web to continue directly onto the converter from the digital printer. The DC330 Converter can also beused as an off-line converting and finishing unit for jobs from other digital presses or conventional presses.It even functions as a printing press for specialised value-added solutions.



    Key advantages of the DC330 Finishing Solution


      • Outstanding versatility, thanks to a modular platform that can be customised with the exact applications you need.
      • Ergonomical canterlivered design. Easy web-up, cleaning and maintenance with the modern one sided station mount.
      • Minimum waste design. Die dials in within one rotation. No station movement or mechanical setup needed.
      • Maximum flexibility Through the ability to handle 50.8-546 mm / 2"-21" repeat lengths.
      • Remote Control Interface for the HP Indigo digital presses.
      • Graphic Touchscreen Shows the machine configuration, spindle directions and web-up.
      • Servo Driven Web Tension ControlEnsures a wide substrate coverage.


    Hot Foil Unit


    The GM type HOTFB330 is a 30 ton precision stamping machine for production of high quality labels. The machine can be used for foil stamping, embossing or one pass foil & embossing. The best way to impress consumers, is the right combination of quality and beauty, and this is where the FB330 flatbed hot stamp unit from Grafisk Maskinfabrik will help you out. The FB330 is an innovative unit that will give your labels an impressive and unique look-and-feel. On the matter of the quality of hot stamping, flatbed is the best choice, and on the matter of beauty, the FB330 can add intricate details of gold, silver or even holograms to your labels.



    Laser only system.


    The compact DC330 laser only system from GM offers efficient and economic die cutting of self-adhesive labels. Designed to be fully digital from the start this unit is the ideal companion for a digital press. The laser only designed is focused at ultra short runs.

    Advantages of the GM Laser Die Cutting System:

      • No more ordering conventional tooling and waiting days for delivery.
      • No more long make readies and waste material.
      • No more capital tied up in conventional tooling.
      • No more lifting heavy rotary tools.
      • No more storage of conventional tooling.


  • GM DC330 Mini

    Fully integrated converting line for labels. Provides UV flexo varnish, die cutting, slit and rewind on one single compact platform. With more than 100 converting lines in production GM offers a robust and proven platform for label converting. The lines are build using standard components from leading manufactures such as Panasonic, Lenze, Fife, Dines, and Gerhardt. The drive train in the DC330 series of machines is completely servo driven offering low maintenance, step less tension control and good registration.



    Key advantages of the DC330 Mini Solution


      • Maximum flexibility Through the ability to handle 50.8-546 mm / 2"-21" repeat lengths and process at speeds up to 32m/min
      • Big unwind, dual rewind and splice table with air clamps Even with a compact platform, this unit provides a Ø700 (27”) inch unwind and dual rewinding. This is an advantage during slitting and ensures minimum roll change. A pneumatic splice table on top of the web guide makes job change easy
      • Minimum waste Die dials in within one rotation. No station movement or mechanical setup needed.
      • Graphic Touchscreen Shows the machine configuration, spindle directions and web-up.

  • GM DC330 Mini

    Fully integrated converting line for labels. Provides UV flexo varnish, die cutting, slit and rewind on one single compact platform. With more than 100 converting lines in production GM offers a robust and proven platform for label converting. The lines are build using standard components from leading manufactures such as Panasonic, Lenze, Fife, Dines, and Gerhardt. The drive train in the DC330 series of machines is completely servo driven offering low maintenance, step less tension control and good registration.



    Key advantages of the DC330 Mini Solution


      • Maximum flexibility Through the ability to handle 50.8-546 mm / 2"-21" repeat lengths and process at speeds up to 32m/min
      • Big unwind, dual rewind and splice table with air clamps Even with a compact platform, this unit provides a Ø700 (27”) inch unwind and dual rewinding. This is an advantage during slitting and ensures minimum roll change. A pneumatic splice table on top of the web guide makes job change easy
      • Minimum waste Die dials in within one rotation. No station movement or mechanical setup needed.
      • Graphic Touchscreen Shows the machine configuration, spindle directions and web-up.